How To Charge Lithium Ion Batteries


How To Charge Lithium Ion Batteries

If you need to increase your battery life whilst retaining its performance, then it is helpful to know the best way to charge your LiFePO4 battery. Despite the chemistry of some lithium batteries that are available nowadays in the marketplace, LiFePO4 is arguably the best now, especially for applications that are requiring large cell storage.

LiFePO4 batteries are a way more secure than different lithium technologies, due to their extraordinary durable chemistry. LiFePO4 batteries may trap hearth place if misused.

Charging LiFePO4 Batteries:

The most frequently asked question from customers is how to charge LiFePo4 battery? So the answer is quite simple, you can charge it with LiFePo4 battery charger. You must ensure that you are now no longer the use of a charger, which is, produced for different lithium ion chemistry. These batteries normally have better voltage than what Lithium Ion Phosphate batteries need.

Charger Inspection:

Check that cables of battery charger are covered and now no longer damaged earlier than the use of a LiFePO4 charger. Charger terminal connectors must be easily aligned with the battery terminals. You can also read the LiFePo4 battery manufacturer’s guide on how to do this.

Charging Guideline:

LiFePO4 batteries do now no longer want to be charged after every use if they are now no longer absolutely discharged. They are not damaged (PSOC), when the liFePO4 batteries are left in part charge. Due to low voltage, it will automatically removes the battery charging and load after BMS disconnects the battery.

Charging Temperature:

LiFePO4 batteries may be charged properly at temperatures starting from 0°C to 45°C. LiFePO4 do now no longer require temperature repayment for voltage, when charging at warm or cold temperature. All canbat LiFePO4 batteries include an internal BMS, which protects the battery from extreme cold and heat.

If the BMS is disconnected due to a decrease in temperature, the BMS must be turned on again and the battery must be heated before receiving the charging current. Due to high temperature, BMS can disconnect the battery, it should be cooled down before charging BMS again.

The LT Collection Lithium Batteries’ charging and discharging temperature ranges between -20 ° C to 60 ° C. The LT low temperature batteries are only designed to use for Canada’s anemic climate. These batteries use a unique generation and incorporate a heater powered by a charger. No additional additives are needed.

The complete heating and charging procedure is seamless. When charging under 0°C is attempted, the heating device routinely activates, and it deactivates whilst not required. The heating device is powered via way of means of the charger in place of the battery, stopping the lithium battery from discharging and preserving you powered.

Best Ways To Charge A LiFePO4 Battery:

1. Using A Smart Charger:

One of the satisfactory approaches to charge a battery is to apply a charger that fits the chemistry of the battery, as everyone has specific characteristics. The smart charger can be configured to match the charging profile of the LiFePO4 battery. This uses optimized charging technology to improve battery performance and life.

2. Using A Lead Acid Battery:

So, are you thinking about switching your deep-cycle lead-acid batteries to the latest LiFePO4 batteries (smart moves) and wondering if you need a brand new charger?

Due to the similar nominal voltages of lead-acid batteries (AGM and Gel) and LiFePO4, the AGM and Gel charging algorithms generally meet the LiFePO4 charging voltage requirements.

The major difference between these batteries is that, unlike lead-acid batteries, LiFePO4 batteries do not deteriorate as fast as when they are not connected. This process related to flow charging is not required.

3. Using Solar Panels:

Not only is it possible to charge the LiFePO4 battery using a photovoltaic system, it is highly recommended.   This is because the stored energy is not only obtained from another energy source (such as onshore electricity), but is actually produced by solar panels.

4. Using An Alternator:

Finally yet importantly, using an alternator is another great way to admire the LiFePO4 battery. This is an ideal solution for boats that have RVs and battery garages.
Back To Top